Call 08048985132 70% Response Rate

Send Email

Metal Gathering Machine

We are a leading Manufacturer of 25kva metal gathering welding machine, metal gathering machine, smg 30 metal gathering machine, smg 45 metal gathering machine, 75kvamatel gethring machine and 45kva metal gathering machine from Rajkot, India.
25kva Metal Gathering Welding Machine

25kva Metal Gathering Welding Machine

Product Price: Rs 2.8 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
BrandPARMO
Usage/ApplicationIndustrial
Country of OriginMade in India
  • Its fullyt hydrolic
  • Type of matel:m.s/ss/Aloys
  • Hot forgate bolt
Get Best QuoteRequest A Callback
Metal Gathering Machine

Metal Gathering Machine

Product Price: Rs 2.85 Lakh / UnitGet Best Price

Product Details:
BrandParas
Height58 inch
Model NoPMGM-25
Voltage440 V
Weight700 Kg
Length40 inch
Width32 inch
Power25 KVA
Introduction:
  • Metal gathering machine is fully hydraulically operated with Resistance heater.

Application:
  • Used in hot forged bolt, wheel spanner and engine valves industries etc.

Feature:
  • Noise free and environmentally friendly against oil furnace and up-setter.

Principle Of Operation:
  • Metal gathering operation consists of heating the part of the job and pushing the remaining cold material of the job into hot zone till the required metal gathering takes place.

Advantages:
  • Simultaneous heating and roaming in one machine.
  • Almost unlimited gather in one operation.
  • The mechanical upsetting limitations of above 3x dia, no longer applies. the modern engine valve has an upset lenght of up to 20x dia. and length of 40x dia. are commonly electro-upset.
  • No longitudinal flash is formed such as in unavoided in split die mechanical upsetter.
  • No waste of heating energy or material. outside of the upset section the bar remains cold. the upper volume can be precisely controlled to allow subs
  • Always ready for instant use, no worm up period. 
  • Energy efficient, about 0.35-0.40kwh/kg.
  • Minimal scaling because of simultaneous heating and gathering, improved die life in subsequent forging, operations.
  • No environmental pollution by emission of heat, fume or exhaust gas.
  • Free upsets can be finished forged without reheating and so save time energy.
  • Consistent heating temperature through the use of thyristor control.
  • Optimal grainflow and fault free surface. The unheating bar length remains unchanged.


Note:
Due to policy continuous improvements we reserve the right to right to equipment and change specification without notice.

Other Product Details:

Model No Voltage Weight Length Height Width Power
PMGM-35 440 V 750 Kg 40 inch 58 inch 32 inch 35 KVA
PMGM-45 440 V 1000 Kg 53 inch 95 inch 36 inch 45 KVA
PMGM-75 440 V 1200 Kg 60 inch 96 inch 38 inch 75 KVA
PMGM-100 440 V 1600 Kg 60 inch 100 inch 40 inch 100 KVA
PMGM-150 440 V 1600 Kg 60 inch 100 inch 40 inch 100 KVA
Get Best QuoteRequest A Callback
SMG 30 Metal Gathering Machine

SMG 30 Metal Gathering Machine

Product Price: Rs 2.5 Lakh / UnitGet Best Price

Product Details:
Model Name/NumberSMG 30
Body MaterialMS
BrandParas
Usage/ApplicationHot Forge Bolt, Wheel Spanner and Engine Valves Industries etc.
Rated Supply400 V
Phase2
Load30 KVA
Max. Diameter of Rod16 mm
Max. Dia. of Gatered Head50 mm
Max. Gathering Force50670 Kgf
Max. Length of Gathered Head75 mm
Clamping Force85 kgf
Leading Manufacturer of  ALL TYPES OF WELDING MACHINE, 10kva pneumatic welding machine, 15 kva unique spot welding machine and 10 kva hand spot machine from Rajkot.

SHOWROOM - AHMEDABAD
Get Best QuoteRequest A Callback
SMG 45 Metal Gathering Machine

SMG 45 Metal Gathering Machine

Product Price: Rs 4.5 Lakh / UnitGet Best Price

Product Details:
Model Name/NumberSMG 45
Body MaterialMS
BrandParas
Rated Supply400 V
Phase2
Frequency50 Hz
Load45 Kva
Max. Diameter of Rod30 mm
Max. Dia. of Gatered Head100 mm
Max. Gathering Force72000 Kgf
Max. Length of Gathered Head75 mm
Clamping Force75 kgf
Leading Manufacturer of  ALL TYPES OF WELDING MACHINE, 10kva pneumatic welding machine, 15 kva unique spot welding machine and 10 kva hand spot machine from Rajkot.

SHOWROOM - AHMEDABAD
Get Best QuoteRequest A Callback
75KVAmatel gethring machine

75KVAmatel gethring machine

Product Price: Rs 7.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Body MaterialMILD STEEL
BrandPARMO
Usage/ApplicationWELDING MACHINE INDUSTRIAL
Country of OriginMade in India
  • Its fullyt hydrolic
  • Type of matel:m.s/ss/Aloys
  • Hot forgate bolt
Get Best QuoteRequest A Callback
45kva Metal Gathering Machine

45kva Metal Gathering Machine

Product Price: Rs 5.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Body MaterialMILD STEEL
BrandPARMO
Usage/ApplicationWELDING MACHINE INDUSTRIAL
Country of OriginMade in India
  • Its fullyt hydrolic
  • Type of matel:m.s/ss/Aloys
  • Hot forgate bolt
Get Best QuoteRequest A Callback
35KVA Metal Gathering Welding Machine

35KVA Metal Gathering Welding Machine

Product Price: Rs 3.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Body MaterialMS
BrandPARMO
Usage/ApplicationWELDING MACHINE
Country of OriginMade in India
We are leading manufactuer of 35KVA Metal Gathering Welding Machine, RAJKOT, GUJARAT. 
  • Its fullyt hydrolic
  • Type of matel:m.s/ss/Aloys
  • Hot forgate bolt


Additional Information:

  • Delivery Time: 1 DAY IN LOCAL
Get Best QuoteRequest A Callback
100KVA metal gathering machine

100KVA metal gathering machine

Product Price: Rs 9 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Body MaterialMILD STEEL
BrandPARMO
Country of OriginMade in India
  • Its fullyt hydrolic
  • Type of matel:m.s/ss/Aloys
  • Hot forgate bolt
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "Metal Gathering Machine"?
Thank youYour Enquiry has been sent successfully.
© Parmo Electro Products. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.